Technical Features
- TEAC CD Player Mechanics, with 5 seconds read buffer of - Switching between CD player and DAC modes. - 5 digital inputs, USB, 2 x SPDIF RCA, SPDIF OPTICAL, AES-EBU. - USB input and SPDIF full bandwidth, up to 24 Bit / 192 KHz. - Possibility to select the oversampling frequency 44.1-48.0-88.2-96.0-176.4-192.0 KHz or AUTO. - Possibility to customise for each digital input all parameters, including the value of oversampling. - Possibility to use as the master A/D clock source the local oscillator or the clock form input signal. - Two separate local clock oscillator for the two values . 22MHz / 24 MHz (44.1 / 48KHz). - Local Oscillator high stability, low Jitter and low phase noise. - Possibility to configure one of the 2 RCA inputs as digital output. - Two PCM 24 Bit Digital to Analogue converter. - Digital filter x8 oversampling. - User selectable filter roll-off (Sharp & Slow). - Proprietary I-V architecture conversion. - Analogue output stage based with full discrete devices amplifier. - Extreme low noise, high resolution and high speed. - Wide band ( >2 MHz ) schematic topology. - RCA and Balanced output connection. - Separate power supply for Digital and Analogue Output stage. - High filtering capacity with numerous low impedance capacitors. - 13 Powers supply regulators. - Full aluminium non-magnetic frame. - Toroidal transformer specially designed for audio applications. - Remote control of all functions.
Technical Specification
Connections Inputs : IN1 : USB, 2.0 High Speed IN2 : SPDIF RCA, 75Ohms IN3 : AES/EBU XLR, 110Ohms IN4 : TOSLINK OPTICAL, 96 KHz, (192.0 KHz may be achieved, but not guaranteed) IN5 : SPDIF RCA, 75Ohms (IN5 can be set as SPDIF Output by CD Mechanism)
Sampling Frequencies: 44.1KHz, 88.2KHz, 176.4KHz, 48.0KHz, 96.0KHz, 192.0KHz UpSampler Frequencies: 44.1KHz, 88.2KHz, 176.4KHz, 48.0KHz, 96.0KHz, 192.0KHz, AUTO MODE Based on TI SRC4392 Clock performances: +/- 2ppm typ. at 25°, +/- 10ppm at 60° Digital Filter: Slow & Sharp mode, based on TI DF1706 De-emphasis: 44.1KHz, 48.0KHz, auto e manual mode Connections Outputs : Line RCA output, XLR Balanced Outputs Voltage: 3.0 V RMS (+10 dBV) RCA (at 0 dB), 6.0 V RMS (+16 dBV) XLR(at 0 dB) Output Impedance: 200 ohm System Frequency Response (CD Mode): 0,0 to 22KHz +/- 0,3 dB (limited from CD standard) Analogue Output Filter: 0,0 to 180 kHz +/- 3 dB Analogue Stage Frequency Response: 0,0 to 2MHz +/- 3 dB Configuration: Solid state Oversampling: DF 1706 8 x Digital Filter Oversampling Filter: User selectable Sharp & Slow Roll-off filter response. D/A Converter: PCM 1704 Multibit 24 Bit D/A converter I/V Conversion: I/V Conversion by proprietary topology with discrete component Output Stage: Proprietary topology with discrete component, high linearity & low noise Supply: 230 V AC / 50 Hz, (100V AC or 115 VAC / 50-60Hz in some country) Dimensions (HxWxD): 75 x 430 x 350 mm Weight: 10 Kg Note: Integrated Digital Source with full remote control
Note : Specification subject to change without notice
|