SPECIFICATIONS |
General |
|
Amplifier Power (RMS) |
600 Watts |
Peak Dynamic Power |
1200 Watts; the Peak Dynamic Power is measured by recording the highest peak-to-center voltage produced by the power amplifier with its limiters disabled, across the output of a resistive load equal to minimum impedance of the transducer, using a 50Hz sine wave burst, 3 cycles on, 17 cycles off. |
Bass Driver |
12" (300mm) PolyPlas™cones with rubber surround, cast-aluminum chassis, HeatScape™ motor structure, Symmetrical Field Geometry™ (SFG™), oversized fiberglass voice coil, magnetic shorting ring |
Frequency Response (–3dB) |
22Hz – Low-pass crossover frequency |
Low-Pass Crossover Frequencies |
50Hz – 150Hz, continuously adjustable (150Hz when using speaker-level connection) |
Inputs |
Gold-plated 5-way binding-post speaker-level; left and right line-level, switchable to LFE |
Outputs |
Gold-plated, 5-way binding-post speaker-level |
Enclosure Design |
Sealed |
Baffle |
Low-diffraction, IsoPower™ |
Dimensions (H x W x D) |
16-1/2" (15-1/2" without feet) x 15-1/2" x 15-1/2" (419mm [394mm without feet] x 394mm x 394mm) |
Weight per Speaker |
58 lb (26.4kg)
|