Technical Features
- Extreme low noise and high speed schematic topology. - Wide band ( >1 MHz ). - High current MOS-FET power device (100 A output peak current). - 8 power device for a total rated 1.000 W power handling capability. - Semiconductor selected and matching for Left & Right channel. - PCB Board with wide ground plane. - Separate ground plane power supply for Gain, Driver and Output stage. - High speed and low noise regulated power supply for gain and driver stage. - High filtering capacity with numerous and low impedance capacitors. - Full aluminium non-magnetic frame. - Toroidal power transformer specially designed for audio applications, low dispersion flow. low mechanical noise, high permeability magnetic core with consequent low output impedance. - Remote control of all functions with NORMA RC-A remote control. - Two-speed volume control (Fine and Fast). - Possibility of housing the PHONO Stage Board inside. - High quality phono stage, for MM and MC pick-up - Protection for DC signal sensitive speakers. - Inputs selection by relay with GOLD/PALLADIUM contacts. - Stand-by mode switches off the microprocessor one the command is executed, so as to annul any interference towards analogue signal.
Technical Specification
Inputs: 1 Phono MM/MC, 4 Line RCA, 1 Direct (AV) IN Inputs Impedance: 10 Kohm Outputs: 1 REC OUT, 2 pair of Main Speakers Outputs, Phono: MM / MC, Phono Input Impedance: 47 Kohm, 1 Kohm, 500 Ohm. 100 Ohm, Spare Phono Gain: 34 dB, 38 dB, 42 dB, 46 dB, 50 dB, 52 dB, Spare Speaker outputs: 2 pair main output Frequency Response: 0-800 KHz (Volume at MAX) Configuration: Solid state Output Power: 70 W RMS / 8 Ohm – 140W RMS / 4 Ohm (each channel) Outputs Current : 24 A continuous, 100 A peak (each channel) Electric transformers: 2 toroidal special audio use, 400 VA per channel Gain Sensitivity: 34 dB, 470 mV for 70 W / 8 Ohm Supply: 230 V AC / 50 Hz, (100V AC or 115 VAC / 50-60Hz in some countries) Dimensions (HxWxD): 75 x 430 x 350 mm Weight: 15 Kg
|